Everything Smart

Everything Presence Pro

Set up Everything Presence Pro with Home Assistant or Homey. Explore hardware, Ethernet options, tuning and firmware installation guides.


The Everything Presence Pro is our most powerful presence sensor, combining the best of both worlds: the static presence detection of the EP1 and the real-time tracking capabilities of the EPL, all in one device. With professional features like PoE, ethernet, and alarm panel integration, it's designed for serious smart home installations.

Key Features

Feature Description
Dual mmWave Sensors SEN0609 (static presence, 25m range) + LD2450 (tracking, 6m range)
Multi-Target Tracking Track up to 3 people simultaneously with X/Y coordinates
Zone Detection 4 detection zones + 2 exclusion zones
PIR Motion Sensor Fast motion detection for instant response
Illuminance Sensor Light level detection in lux
PoE & Ethernet Professional wired connectivity with Power over Ethernet
Alarm Panel Integration Screw terminals with solid-state relay output
RGB Status LED Configurable LED with multiple display modes
CO2 Module Optional air quality monitoring (sold separately)
Bluetooth Proxy Optional Home Assistant Bluetooth proxy functionality

How It Compares

Feature Pro EP1 EPL
Static Presence (SEN0609) ✓ 25m ✓ 25m ✗
Target Tracking (LD2450) ✓ 6m ✗ ✓ 6m
PIR Motion ✓ ✓ ✗
Zone Detection ✓ 4 + 2 exclusion ✗ ✓ 4 + 2 exclusion
Multi-Target Tracking ✓ Up to 3 ✗ ✓ Up to 3
Temperature & Humidity ✓* ✓ ✗
Illuminance ✓ ✓ ✓
CO2 (optional) ✓ ✓ ✓
Ethernet / PoE ✓ ✗ ✗
Alarm Panel Relay ✓ ✗ ✗
RGB LED ✓ ✗ ✗
Bluetooth Proxy ✓ ✗ ✗

* Temperature and humidity sensors are included but may be less accurate due to heat from internal components. See FAQ below.

Quick Start (Home Assistant)

Follow the step-by-step guide to integrate your device with Home Assistant:

Info

The Pro ships with WiFi enabled by default. After initial setup, you can enable Ethernet/PoE for more reliable connectivity.


FAQs

What makes the Pro different from EP1 and EPL?

The Pro combines both mmWave sensors found in the EP1 and EPL:

This means you get the best of both: reliable detection of stationary people AND precise location tracking within a room.

What's the difference between the Occupancy sensors?

The Pro provides multiple occupancy sensors for different use cases:

Sensor What It Detects Best For
Occupancy Combines PIR + Static + Tracking General automations (recommended)
mmWave Presence Combines Static + Tracking sensors mmWave-only presence without PIR
Static Presence SEN0609 sensor only Long-range stationary detection
Tracking Presence LD2450 sensor only Zone-based presence
Motion PIR sensor only Fast motion detection

Recommendation: Use the main Occupancy sensor for most automations. It combines all sensors for the best balance of speed and accuracy.

Can I use zones with the Pro?

Yes! The Pro includes the LD2450 tracking sensor which supports:

Use the Zone Configurator add-on to visually create and manage zones.

Should I use Ethernet or WiFi?

Ethernet/PoE is recommended for permanent installations:

Connection Pros Cons
Ethernet/PoE Most reliable, single cable for power + data, no WiFi congestion Requires ethernet cable run
WiFi Easy setup, no cables Can be affected by interference, requires separate power

The Pro ships with WiFi firmware. After initial setup, you can switch to Ethernet mode - see Enable Ethernet & Optional Features.

What is the Relay Output for?

The Pro includes a solid-state relay output with screw terminals for connecting to alarm panels or other 12-24V systems. The relay can be triggered by:

Mode Behavior
Disabled Relay stays off
Motion Only Relay activates on PIR motion
Presence Only Relay activates on occupancy detection
Motion or Presence Relay activates on either

This allows the Pro to integrate with traditional alarm systems, door controllers, or any device that accepts a contact closure input.

See Alarm Panel Integration for wiring details.

What does the RGB LED show?

The LED can be configured to show different information:

Mode Behavior
Manual Control Control via Home Assistant (or turn off)
Presence Glows when presence is detected
Environmental Changes color based on CO2 levels (requires CO2 module)
Environmental + Presence Combines both modes

See LED Modes & Customization for complete details.

Are the temperature and humidity sensors accurate?

The Pro includes temperature and humidity sensors (SHTC3), but they may be less accurate than expected due to:

  1. Heat from components - The Pro has two mmWave sensors, an ESP32, and potentially PoE circuitry, all generating heat in a compact enclosure
  2. Mounting location - Since the Pro is typically mounted on ceilings or high on walls (for PoE/alarm wiring), it's in areas where heat naturally collects

Our recommendation: Use these sensors for general trends or relative changes, but don't rely on them for precise temperature control. Calibration offsets are available if you want to adjust the readings.

The illuminance sensor is not affected by these issues and provides accurate light level readings.

Can I enable Ethernet, CO2, or Bluetooth features?

Yes! The Pro supports enabling additional features from Home Assistant. You can change:

See Enable Ethernet & Optional Features for step-by-step instructions.

Does the Pro work with the Zone Configurator?

Yes! The Zone Configurator fully supports the Pro. You can:

What power supply do I need?

For WiFi setup: Use a quality 5V USB-C power supply rated for at least 2A.

After enabling Ethernet/PoE: Use a PoE switch or PoE injector (802.3af). No separate power supply needed.

Can I 3D print a ceiling mount?

The Pro ships fully assembled in an injection-molded case - no 3D printing required.

An optional ceiling mount allows flush mounting on ceilings or walls, with proper routing for PoE and/or alarm wiring. You can either:


Imported Outline comment

Dave Barclay - 2026-01-07

The alarm relay is a single pole, normally open, volt free contact controlled directly from GPIO 12. It is normally used to integrate to alarm panels based on motion detection but could easily be used to give a hardwired output in response to high CO2 levels for example

Homey

Everything Presence Pro also works with Homey through the Everything Presence app.