Everything Smart

Set up your Pro device in Homey

Set up Everything Presence Pro in Homey. Follow the connection and configuration steps to get your presence sensor working.

Connect Everything Presence Pro to Homey for local presence detection, sensor readings and Flows. You do not need Home Assistant to pair the device with Homey.

Before you start

Info

Communication uses the local ESPHome Native API on TCP port 6053. The current integration expects an unencrypted API. A device running a custom configuration with API encryption will not connect through this integration.

Add a new device over Bluetooth

  1. Power on the Pro near your Homey hub.
  2. In Homey, open Devices, add a device, search for Everything Presence, and select Everything Presence Pro.
  3. Choose New device to start Bluetooth Wi-Fi onboarding.
  4. Select your Pro from the discovered devices.
  5. Enter your 2.4 GHz Wi-Fi network name and password.
  6. Wait for the Pro to join the network, then complete pairing and assign a name and room.

Bluetooth is used for initial Wi-Fi onboarding; normal sensor updates travel over your local network.

Add a device already on your network

  1. Add Everything Presence Pro through the Everything Presence app in Homey.
  2. Choose Already on Wi-Fi. This opens network discovery rather than Bluetooth onboarding.
  3. Select your Pro and complete pairing.
  4. If the device address changes later, check Device IP / Hostname in the Pro's Homey settings.

For a Pro already configured for Ethernet, use network discovery once it is reachable on the same local network. The Pro's network mode must already be configured correctly; plugging in an Ethernet cable does not configure the firmware. See Enable Ethernet & Optional Features for the existing firmware guide. That guide includes Home Assistant-specific steps.

Check the connection

Read Homey Sensors and Controls to understand the individual sensors and Automations and Flows to build your first automation.

Troubleshooting

Problem What to check
Pro is not offered in Homey Update the Everything Presence app, then select its Pro device entry.
Bluetooth scan finds nothing Move the powered device closer to Homey. If it already has network credentials, try network discovery instead.
Network scan finds nothing Confirm the Pro is online and reachable from Homey. Guest Wi-Fi, client isolation or separate VLANs can prevent discovery and communication.
Device is found but cannot connect Check local TCP port 6053 access and whether custom firmware has enabled API encryption.
Device becomes unavailable Check power, network connection and the Device IP / Hostname setting. A DHCP reservation can help keep its address stable.
Main motion alarm behaves differently from the PIR Check Motion Source: the main alarm follows the selected source, not necessarily PIR.

If you need further assistance, include your Homey app version, Pro firmware version, network type and the stage at which setup fails when contacting support.