Everything Smart

How to Tune Your Pro

Tune Everything Presence Pro presence detection for your room. Follow the guide to adjust sensor settings and reduce unwanted detections.

The Everything Presence Pro has two mmWave sensors with different characteristics. This guide helps you optimize both for your room.

Understanding the Two Sensors

Sensor Range Best For Key Settings
Static (SEN0609) Up to 25m Detecting still people Range, Sensitivity
Tracking (LD2450) Up to 6m Location, zones, movement Range, Zones

Both sensors contribute to the main Occupancy entity, so tuning either can improve your results.

Quick Tuning Checklist

  1. Set Static Presence Max Range to match your room depth
  2. Set Tracking Detection Range to match your room depth
  3. Add exclusion zones for problem areas (windows, fans)
  4. Adjust timeouts for your use case
  5. Fine-tune sensitivity if needed

Tuning the Static Presence Sensor (SEN0609)

Range Settings

Setting What It Does Recommendation
Min Range Ignores detections closer than this Usually 0m (no minimum)
Max Range Ignores detections beyond this Set to room depth or slightly less
Trigger Range Initial detection threshold Usually same as Max Range

To apply range changes:

  1. Set your desired values
  2. Click Apply Static Range Settings button

Sensitivity Settings

Setting What It Does Higher Value
Trigger Sensitivity How easily detection starts More sensitive, more false triggers
Sustain Sensitivity How easily detection maintains More sensitive, stays on longer

Recommended starting values:

To apply sensitivity changes:

  1. Set your desired values
  2. Click Apply Static Sensitivity Settings button

Common Issues & Fixes

Issue Solution
Detects through walls Reduce Max Range to stop before the wall
Misses still people Increase Sustain Sensitivity (7-9)
False triggers when empty Reduce sensitivities, check for moving objects
Slow to detect Increase Trigger Sensitivity, reduce On Delay

Tuning the Tracking Sensor (LD2450)

Detection Range

Set Tracking Detection Range to approximately your room depth in cm:

Zone Configuration

For precise control, use the Zone Configurator to:

Exclusion Zones

Use exclusion zones for:

Update Rate Settings

Setting Trade-off
Tracking Update Rate Faster = more responsive, more CPU usage
Target Update Rate Faster = more HA database writes
Target Tracking Detail More detail = more entities updated

For most users: Keep defaults. Only reduce if you have performance issues.


Timeout Settings

Room Type Occupancy Timeout Motion Timeout
Hallway/passage 15-30s 10s
Bathroom 60-120s 15s
Kitchen 30-60s 10s
Living room 120-300s 15s
Office/desk 300-600s 15s
Bedroom 300-600s 15s

Longer timeouts prevent lights turning off while you're still present but sitting still.


Combining Both Sensors

The Pro's Occupancy entity combines both mmWave sensors plus PIR:

Occupancy = PIR Motion OR Static Presence OR Tracking Presence

This means:

You can also use individual sensors for specific automations:


Troubleshooting Detection Issues

Sensor detects when room is empty

  1. Check for moving objects (fans, pets, curtains)
  2. Reduce Max Range if detecting through walls
  3. Add exclusion zones for problem areas
  4. Lower sensitivity settings

Sensor misses people who are sitting still

  1. Increase Static Sustain Sensitivity (7-9)
  2. Ensure line of sight to the seating area
  3. Check Max Range includes the seating area

Detection is slow

  1. Increase Static Trigger Sensitivity
  2. Reduce Static On Delay to 0
  3. Ensure adequate Tracking Update Rate

Zones not working correctly

  1. Use Zone Configurator to visualize real-time tracking
  2. Verify zone coordinates cover the intended area
  3. Check exclusion zones aren't masking valid detections