Everything Smart

Everything Presence Pro — Hardware Overview

Explore Everything Presence Pro hardware, connections and components to understand your device before installation and setup.

The Everything Presence Pro is our most advanced presence sensor, combining multiple detection technologies with enterprise-grade connectivity options.

Info

Image coming soon!

Components

Info

Image coming soon!

mmWave Sensors

The Pro includes two mmWave radar sensors for comprehensive coverage:

Sensor Type Range Purpose
DFRobot SEN0609 Static presence Up to 25m Detecting stationary people
HiLink LD2450 Tracking Up to 6m Real-time position tracking, zones

Both sensors work together via the combined Occupancy entity for reliable presence detection.

PIR Motion Sensor

A passive infrared (PIR) sensor provides instant motion detection for fast light-on response.

Environmental Sensors

Sensor Measurement Notes
BH1750 Illuminance (lux) Accurate ambient light measurement
SHTC3 Temperature & Humidity See important note below

Warning

Temperature & Humidity Accuracy The Pro packs significant processing power into a compact enclosure. This generates heat that affects the temperature and humidity readings. Combined with typical ceiling/corner mounting where heat naturally collects, these readings may not reflect actual room conditions. These sensors are included for users who may find them useful despite limitations, but should not be relied upon for accurate climate control.

Optional CO2 Module

Everything Presence Pro with optional CO2 module installed

A separate SCD40 CO2 sensor module can be purchased and connected for air quality monitoring. When installed, it enables:

Connectivity Options

Ethernet/PoE

The Pro supports wired ethernet via the LAN8720 chip:

WiFi

Standard WiFi connectivity is also supported:

Bluetooth Proxy

When enabled via firmware variant, the Pro can act as a Bluetooth proxy for Home Assistant, extending your BLE device range.

Relay Output

Alarm panel screw terminal connections

The Pro includes a solid-state relay output accessible via screw terminals:

Common uses:

Physical Connections

Main Connector

The primary connector provides power and communication:

Screw Terminal Block

For alarm panel and relay connections:

LED Indicators

RGB Status LED

A programmable RGB LED (SK6812) can show:

ESP32 Status LED

A secondary status LED indicates device connectivity state.

Mounting Options

Standard Desktop/Shelf Mount

The Pro can be placed on any flat surface pointing toward the detection area.

Ceiling Mount Accessory

Ceiling Mount Accessory — illustration 1

An optional 3D-printed ceiling mount case allows:

The ceiling mount STL files are available on Printables for free, or you can purchase a pre-printed mount from the shop.

Technical Specifications

Specification Value
Processor ESP32
Power PoE or USB-C
WiFi 2.4 GHz
Ethernet 10/100 Mbps (LAN8720)
Static Detection Range Up to 25m
Tracking Range Up to 6m
Tracking Targets Up to 3 simultaneous
Zones 4 detection + 2 exclusion
Enclosure Injection molded

What's in the Box

Not included: