Everything Smart

Device-Specific Features

Compare device-specific features in Zone Configurator and see which capabilities are available for your Everything Presence sensor.

Zone Configurator provides tailored dashboards for Everything Presence Pro, Lite, and One devices. Each device has different sensors and capabilities, so the interface adapts accordingly.

Feature Comparison

Feature Pro EPL EP1
Multi-target tracking ✓ Up to 3 targets ✓ Up to 3 targets ✗
X/Y coordinate positions ✓ ✓ ✗
Zone detection ✓ 4 zones + 2 exclusion ✓ 4 zones + 2 exclusion ✗
Entry/Exit detection ✗ ✓ ✗
Heatmap ✓ ✓ ✗
Trail recording ✓ ✓ ✗
Static presence (long range) ✓ Up to 25m ✗ ✓ Up to 25m
Distance detection ✓ Per-target ✓ Per-target ✓ Single-point
Temperature ✓* ✗ ✓
Humidity ✓* ✗ ✓
PIR motion sensor ✓ ✗ ✓
Illuminance (light level) ✓ ✓ ✓
CO2 (optional module) ✓ ✓ ✓
Room Builder ✓ ✓ ✓

* Pro temperature/humidity may be less accurate due to internal heat - see Pro Hardware Overview


Pro Features

The Everything Presence Pro combines both sensor types: the LD2450 (like EPL) for multi-target tracking AND the SEN0609 (like EP1) for long-range static presence, plus environmental sensors and PIR motion.

Live Tracking Dashboard

The Pro dashboard shows:

Zone Detection

Pro supports up to 4 detection zones plus 2 exclusion masks:

Entry/Exit Detection

Entry/Exit detection is not yet available for Pro. This feature is currently supported on EPL only.

Heatmap & Analytics

View aggregate movement patterns over time to understand how spaces are used.

Trail Recording

Capture movement paths as a visual trail to debug tracking accuracy and zone placement.

Pro-Specific Sensors

The Pro includes sensors from both EPL and EP1:

Sensor Description
Temperature Room temperature (may need calibration offset)
Humidity Relative humidity percentage
Illuminance Light level in lux
CO2 Air quality in ppm (requires optional module)
PIR Motion Instant motion detection

Target Data (per target)

Entity Description
X position Horizontal position in mm
Y position Distance from sensor in mm
Speed Movement speed in m/s
Distance Direct distance from sensor in mm
Angle Angle from sensor center
Active Whether target is currently detected

EPL Features

The EPL uses the LD2450 mmWave sensor which provides real-time coordinate tracking of up to 3 targets simultaneously.

Live Tracking Dashboard

The main EPL view shows:

Zone Detection

EPL supports up to 4 detection zones plus 2 exclusion masks:

Entry/Exit Detection

EPL can detect when someone enters or exits through a doorway by tracking their movement path through entry zones.

Heatmap & Analytics

View aggregate movement patterns over time to understand how spaces are used.

Trail Recording

Capture movement paths as a visual trail to debug tracking accuracy and zone placement.

Target Data (per target)

Entity Description
X position Horizontal position in mm
Y position Distance from sensor in mm
Speed Movement speed in m/s
Distance Direct distance from sensor in mm
Angle Angle from sensor center
Active Whether target is currently detected

EP1 Features

The EP1 uses a different mmWave sensor (SEN0609 or SEN0395) that provides single-point presence detection rather than coordinate tracking. It also includes environmental sensors not found on the EPL.

EP1 Dashboard

When you select an EP1 device, Zone Configurator displays a specialized dashboard focused on environmental monitoring and presence status.

Environmental Sensors

EP1 includes sensors that EPL does not have:

Sensor Description
Temperature Current room temperature (configurable offset)
Humidity Relative humidity percentage
Illuminance Light level in lux
CO2 Air quality in ppm (requires optional module)

Comfort Panel

The Comfort Panel analyzes temperature and humidity to provide:

Sensor Comparison: mmWave vs PIR

EP1 has both mmWave and PIR sensors. The dashboard shows how each responds:

mmWave sensor:

PIR sensor:

The main "Occupancy" entity combines both sensors. Use individual sensor entities if you need:

Activity Log

Real-time log of sensor events:

Today's Statistics

Daily statistics tracked while the dashboard is open:

Statistics are stored locally in the browser and reset daily.

What EP1 Cannot Do in Zone Configurator

Because EP1 doesn't provide X/Y coordinate tracking:

For these features, use a Pro or EPL device instead.


Room Builder with All Devices

Room Builder works with Pro, EPL, and EP1:

With Pro and EPL, you'll see targets moving on your room layout. With EP1, the room layout is for visualization only since there's no coordinate tracking.

Next Steps