Everything Presence — Firmware Updates
Find firmware update guidance for Everything Presence devices and learn how to keep your sensors up to date.
How to check your firmware version, update your device, and find release notes.
Checking Your Current Firmware Version
Home Assistant
- Go to Settings → Devices & Services → ESPHome
- Click on your EP1, EPL, or Pro device
- Look for the ESPHome Version entity (may be under "Entities not shown")
The version number follows the format YYYY.MM.DD (e.g., 2024.11.28).
ESPHome Dashboard
If you have ESPHome Dashboard installed:
- Open the ESPHome Dashboard
- Find your device in the list
- The current version is shown under the device name
How to Update Firmware
There are two methods to update your EP1, EPL, or Pro firmware:
USB Flashing
Use this method if:
- OTA update fails
- Device won't connect to WiFi
- You need to do a factory reset
-
Connect your device to your computer via USB-C
-
Visit the firmware page:
- Everything Presence Lite: Restore or Update your EPL to factory settings using a computer
- Everything Presence One: Restore or Update your EP1 to factory settings using a computer
- Everything Presence Pro: Restore or Update your Pro to factory settings using a computer
-
Click Install
-
Choose Connect via USB
-
Select the COM port for your device
-
Follow the on-screen instructions
Warning
USB flashing will erase your WiFi settings. You'll need to reconfigure the device after flashing.
Release Notes & Changelog
For detailed release notes including new features, bug fixes, and breaking changes:
| Product | Release Notes |
|---|---|
| Everything Presence One (EP1) | GitHub Releases |
| Everything Presence Lite (EPL) | GitHub Releases |
| Everything Presence Pro | GitHub Releases |
Tip
Watch the GitHub repository to get notified of new releases. Click the Watch button and select Releases only.
Beta Firmware
Beta firmware may be available for testing new features before general release.
To access beta firmware:
- Check the GitHub releases page for your device
- Look for releases tagged as Pre-release
- Beta firmware may also be available on the firmware web page under a separate section
Warning
Beta firmware may contain bugs or incomplete features. Use at your own risk and report issues on GitHub or Discord.
Firmware Variants
EP1, EPL, and Pro have multiple firmware variants for different hardware configurations:
EP1 Variants
- Standard - Default firmware for SEN0609 sensor
- SEN0395 - For older EP1 units with SEN0395 sensor
- CO2 - Includes support for the CO2 module
- No BLE - Disables Bluetooth for reduced memory usage
EPL Variants
- Standard (LD2450) - Default firmware
- LD2410 - For alternative LD2410C sensor
- SEN0395 / SEN0609 - For DFRobot sensors
- MR24HPC1 - For Seeed mmWave sensor
- CO2 - Includes support for the CO2 module
- No BLE - Disables Bluetooth for reduced memory usage
Pro Variants
The Pro has 8 firmware variants based on three options:
- Network: WiFi or Ethernet
- Bluetooth: With or without BLE proxy
- CO2: With or without CO2 module support
Available combinations:
- WiFi - Default
- WiFi + BLE - WiFi with Bluetooth proxy
- WiFi + CO2 - WiFi with CO2 module
- WiFi + BLE + CO2 - WiFi with both
- Ethernet - Wired connection
- Ethernet + BLE - Ethernet with Bluetooth proxy
- Ethernet + CO2 - Ethernet with CO2 module
- Ethernet + BLE + CO2 - Ethernet with both
Tip
Make sure you select the correct variant for your hardware. Installing the wrong variant will result in sensors not functioning correctly.
Troubleshooting Updates
OTA Update Fails
- Ensure your device is on the same network as your computer
- Check the device IP address is correct
- Try power cycling the device and attempting again
- If OTA consistently fails, use USB flashing instead
Device Won't Connect After Update
- The update may have reset WiFi settings (especially USB flashing)
- Look for the device's WiFi hotspot and reconfigure
- Follow the Getting Started guide for your device for initial setup
Wrong Firmware Variant Installed
- Sensors may not work or show incorrect readings
- Reflash with the correct variant for your hardware
- Check EP1 Hardware Overview, EPL Hardware Overview, or Pro Hardware Overview to identify your hardware