Everything Smart

Everything Presence One — Automation Examples

Build Home Assistant automations with Everything Presence One. Explore examples that use presence detection and sensor entities.

Create simple, reliable automations with Everything Presence One in Home Assistant.

Prerequisites

Automation Basics

Example 1: Turn on a light when room is occupied

  1. Go to Settings → Automations & Scenes → Create Automation
  2. Click Add Trigger → State
  3. Select your EP1 Occupancy entity
  4. Set To: on
  5. (Optional) Add a Condition → Sun → After sunset
  6. Click Add Action → Device → Select your light → Turn on
  7. Save the automation

Example 2: Turn off the light when room is clear

  1. Create a new automation
  2. Trigger: State → EP1 Occupancy → To: off → For: 2 minutes
  3. (Optional) Condition: State → Your light → is on
  4. Action: Turn off the same light

Tip

Start with a 2-5 minute delay ("For" duration) to avoid lights turning off when people are sitting still. Adjust based on your needs.

Example 3: Presence-based climate control

Turn off heating/cooling when room is empty:

  1. Trigger: State → EP1 Occupancy → To: off → For: 10 minutes
  2. Action: Climate → Set HVAC mode → Off (or set to away temperature)

Create a second automation to restore when occupied:

  1. Trigger: State → EP1 Occupancy → To: on
  2. Action: Climate → Set HVAC mode → Heat/Cool

Example 4: Notification when room occupied (security)

  1. Trigger: State → EP1 Occupancy → To: on
  2. Condition: Time → After 11:00 PM, Before 6:00 AM
  3. Action: Send notification to your phone

Verify Your Automation

Troubleshooting

Symptom Likely Cause Fix
Automation never triggers Wrong entity or state Confirm entity ID matches your device name
Lights turn off too quickly No delay or short timeout Increase the "For" duration (try 2-5 minutes)
Automation triggers randomly False positives from sensor See How to Tune Your EP1 Sensor

Next Steps