Using Everything Presence One

This section helps you get the most out of EP1 after setup. Use the links below for the most common next steps.

Quick Wins

• How to Tune Your EP1 Sensor — placement and sensitivity tuning

• Home Assistant Entities Overview — what each sensor/control does

• Automation Examples — sample automations

• Troubleshooting — common issues and fixes

Recommended Setup Flow

1. Tune placement and distance for your room.

2. Use the Occupancy sensor for most automations.

3. Set appropriate Off Latency for your room type.

Notes

• EP1 does not support zones or multi-target tracking. For zones, consider EPL or Pro.

• EP1 works with Zone Configurator for environmental monitoring and presence status (no zones).

Homey

If you use Homey, see:

• Set up your EP1 device in Homey

• Homey Sensors and Controls

• Automations and Flows

SmartThings

If you use SmartThings, see:

• Install the SmartThings Firmware on EP1

• Add the Samsung SmartThings Edge Driver

• Connect Everything Presence One to SmartThings

• Understanding SmartThings Sensors for Your EP1