Device-Specific Features

Zone Configurator provides tailored dashboards for Everything Presence Pro, Lite, and One devices. Each device has different sensors and capabilities, so the interface adapts accordingly.

Feature Comparison

* Pro temperature/humidity may be less accurate due to internal heat - see Pro Hardware Overview

Pro Features

The Everything Presence Pro combines both sensor types: the LD2450 (like EPL) for multi-target tracking AND the SEN0609 (like EP1) for long-range static presence, plus environmental sensors and PIR motion.

Live Tracking Dashboard

The Pro dashboard shows:

• Target positions - Colored dots representing each detected person (from LD2450)

• Movement trails - Optional trails showing recent movement paths

• Zone overlays - Visual representation of configured zones

• Field of view cone - Sensor coverage visualization

• Static presence indicator - Long-range detection status (from SEN0609)

Zone Detection

Pro supports up to 4 detection zones plus 2 exclusion masks:

• Zones trigger occupancy when a target enters

• Exclusion masks ignore targets in specified areas

• Both rectangular and polygon zone shapes are supported

Entry/Exit Detection

Entry/Exit detection is not yet available for Pro. This feature is currently supported on EPL only.

Heatmap & Analytics

View aggregate movement patterns over time to understand how spaces are used.

Trail Recording

Capture movement paths as a visual trail to debug tracking accuracy and zone placement.

Pro-Specific Sensors

The Pro includes sensors from both EPL and EP1:

Target Data (per target)

EPL Features

The EPL uses the LD2450 mmWave sensor which provides real-time coordinate tracking of up to 3 targets simultaneously.

Live Tracking Dashboard

The main EPL view shows:

• Target positions - Colored dots representing each detected person

• Movement trails - Optional trails showing recent movement paths

• Zone overlays - Visual representation of configured zones

• Field of view cone - Sensor coverage visualization

Zone Detection

EPL supports up to 4 detection zones plus 2 exclusion masks:

• Zones trigger occupancy when a target enters

• Exclusion masks ignore targets in specified areas

• Both rectangular and polygon zone shapes are supported

Entry/Exit Detection

EPL can detect when someone enters or exits through a doorway by tracking their movement path through entry zones.

Heatmap & Analytics

View aggregate movement patterns over time to understand how spaces are used.

Trail Recording

Capture movement paths as a visual trail to debug tracking accuracy and zone placement.

Target Data (per target)

EP1 Features

The EP1 uses a different mmWave sensor (SEN0609 or SEN0395) that provides single-point presence detection rather than coordinate tracking. It also includes environmental sensors not found on the EPL.

EP1 Dashboard

When you select an EP1 device, Zone Configurator displays a specialized dashboard focused on environmental monitoring and presence status.

Environmental Sensors

EP1 includes sensors that EPL does not have:

Comfort Panel

The Comfort Panel analyzes temperature and humidity to provide:

• Comfort level - Overall assessment (Comfortable, Too Hot, Too Cold, etc.)

• Dew point - Calculated dew point temperature

• Feels like - Heat index / perceived temperature

• Temperature zone - Visual indicator on a comfort scale

• Humidity zone - Visual indicator showing dry to humid range

Sensor Comparison: mmWave vs PIR

EP1 has both mmWave and PIR sensors. The dashboard shows how each responds:

mmWave sensor:

• Detects stationary presence (sitting, sleeping)

• Single-point distance measurement (not X/Y tracking)

• May detect through thin walls

PIR sensor:

• Detects motion only (not stationary presence)

• Very fast response time

• Cannot detect through walls

The main "Occupancy" entity combines both sensors. Use individual sensor entities if you need:

• PIR for motion-triggered lighting (instant response)

• mmWave for presence-based automation (stationary detection)

Activity Log

Real-time log of sensor events:

• Presence on/off changes

• mmWave detection events

• PIR motion events

• Session duration tracking

• Time since last change

Today's Statistics

Daily statistics tracked while the dashboard is open:

• Occupancy percentage - Time room was occupied vs total tracking time

• Detection events - Number of times presence was triggered

• Average temperature - Mean temperature with min/max range

• Tracking time - How long the dashboard has been monitoring

Statistics are stored locally in the browser and reset daily.

What EP1 Cannot Do in Zone Configurator

Because EP1 doesn't provide X/Y coordinate tracking:

• No zone creation or detection

• No multi-target tracking

• No heatmap visualization

• No trail recording

• No entry/exit detection

For these features, use a Pro or EPL device instead.

Room Builder with All Devices

Room Builder works with Pro, EPL, and EP1:

• Draw room layouts with walls, doors, and furniture

• Position the sensor icon to match your installation

• Visualize the field of view

With Pro and EPL, you'll see targets moving on your room layout. With EP1, the room layout is for visualization only since there's no coordinate tracking.

Next Steps

• Installation - Set up Zone Configurator

• Setup Wizard - Add your device

• Pro Documentation - Full Pro product documentation

• EPL Documentation - Full EPL product documentation

• EP1 Documentation - Full EP1 product documentation