# Set up your EP1 device in Homey

# Set up your EP1 device in Homey

**Connect Everything Presence One (EP1) to Homey for presence, light, temperature, and humidity automations.**


:::info
**Note** This integration is for local Homey hubs only. Homey Cloud is not supported.

:::

## Prerequisites

* A powered EP1
* Homey hub and the Homey mobile app


:::info
The Homey app uses the unencrypted ESPHome Native API on port 6053. If you have enabled API encryption on your device, the Homey app will not be able to connect. Disable encryption in your ESPHome configuration if you want to use Homey.

:::

## Install the Homey app


1. Install the Everything Presence app on your Homey hub: <https://homey.app/en-us/app/com.everything.presence/Everything-Presence/>

## Add your device


1. Open the Homey app: Add device → search "Everything Presence" → select the app → choose **"Everything Presence One (EP1)"**.

### New device (Bluetooth)


:::tip
Select this if your device is brand new out of the box, or has just been factory reset.

:::


1. Choose "New device".
2. Homey will scan for the device over Bluetooth, once discovered it will display a name like "everything-pr-xxxxxx"
3. Select your EP1 from the list.
4. Enter your Wi‑Fi network name (SSID) and password.
5. The app will look for your device on your network and finish adding it.

### Already on Wi‑Fi (Network)


:::tip
Select this if your device is already connected to WiFi and you are re-adding it to Homey.

:::


1. Choose "Already on Wi‑Fi".
2. The app scans your network. Select your EP1 from the list. If no device is found, enter the IP address manually or retry the scan after 1–2 minutes.
3. Finish adding the device and give it a name.


:::warning
Screenshot of EP1 Homey pairing flow needed.

:::

## Verify

* Move in front of the sensor; Motion should toggle on.
* Check light, temperature, and humidity values update in the device view.

## Troubleshooting

| Symptom | Likely cause | Fix |
|---------|--------------|-----|
| No devices found in Bluetooth scan (New device) | Device not advertising for Bluetooth setup or out of range | Move EP1 closer to your Homey hub and retry Bluetooth setup; ensure the device is powered and ready for Wi‑Fi setup |
| No devices found on network (Already on Wi‑Fi) | Different network/subnet or device not connected yet | Ensure Homey and EP1 are on the same network; wait 1–2 minutes after Wi‑Fi setup and rescan. If still not found, select the option to enter the IP address manually. |

## Next steps

* Explore all Homey capabilities for EP1


---

# **If you still need help**

If you're still having trouble tuning your device, contact us for further assistance. Join us on [Discord](https://discord.gg/Bgfvy2f) to discuss with the community.

---

**Documents**

- [EP1 vs EPL: Which Sensor is Right for You?](https://docs.everythingsmart.io/s/products/doc/ep1-vs-epl-which-sensor-is-right-for-you-5B3RxiY3Kp)
- [Everything Presence One (EP1)](https://docs.everythingsmart.io/s/products/doc/everything-presence-one-ep1-3R178yZSUP)
- [Everything Presence Pro](https://docs.everythingsmart.io/s/products/doc/everything-presence-pro-nh3fIXmow9)
- [Everything Presence Lite (EPL)](https://docs.everythingsmart.io/s/products/doc/everything-presence-lite-epl-ZVnBzYzuX2)
- [Zone Configurator](https://docs.everythingsmart.io/s/products/doc/zone-configurator-93b9scGsa2)
- [Knowledge Base Articles](https://docs.everythingsmart.io/s/products/doc/knowledge-base-articles-KnRRmk4zvt)