Everything Smart

Everything Presence One — Homey Sensors and Controls

Understand the sensors and controls available for Everything Presence One in Homey and how to use them in your setup.

Common device capabilities exposed to Homey for Everything Presence One.

Capability Type What it shows
alarm_motion Alarm Motion/presence state from the device.
measure_luminance Sensor Light level (lux).
measure_temperature Sensor Room temperature (°C).
measure_humidity Sensor Room humidity (%).
onoff.esp32_status_led Switch Turn the board status LED on/off.
onoff.mmwave_led Switch Turn the mmWave module LED on/off.

Notes

Advanced settings (device settings)

These controls appear under the EP1 device → Settings in Homey.

Setting (label) ID Units What it does
Motion Source motion_source - Choose which sensor drives Motion: PIR, mmWave or Occupancy (combination of PIR or mmWave, either will trigger)
Temperature Offset (C) temperature_offset °C Fine-tune reported temperature. Positive raises, negative lowers.
Humidity Offset (%) humidity_offset % Fine-tune reported humidity.
Illuminance Offset (lx) illuminance_offset lx Fine-tune reported light level.
Minimum Distance (m) mmwave_distance_min m Ignore targets closer than this distance.
Maximum Distance (m) mmwave_distance_max m Ignore targets farther than this distance.
Trigger Distance (m) mmwave_trigger_distance m Distance that must be crossed to trigger motion.
Sustain Sensitivity mmwave_sensitivity - How easily motion stays detected after first trigger (1-9).
Trigger Sensitivity mmwave_trigger_sensitivity - How easily motion initially triggers (1-9).
On Latency (s) mmwave_on_latency s Delay before mmWave turns Motion on.
Off Latency (s) mmwave_off_latency s Delay before mmWave turns Motion off.
PIR On Latency (s) pir_on_latency s Delay before PIR turns Motion on.
PIR Off Latency (s) pir_off_latency s Delay before PIR turns Motion off.
Occupancy Off Latency (s) occupancy_off_latency s How long Occupancy stays on after no motion.

Next steps